Tubeless V2 Valves

• Available in 3 different sizes – 44mm, 60mm or 80mm
• 7075 Aluminum machined valve stem
• 7075 Aluminum machined cap
• 4mm machined Allen key slot for easy installation/removal
• Includes valve core removal tool (integrated into the spare alloy cap)
• Supplied with various rubber bases to optimize fit with multiple rim types
• Assortment of 10 eye-catching anodized colors
• Suitable for MTB, gravel, and road
• Suitable for Presta valves only
  

INSTRUCTIONS

1. Premium tubeless valves work with most tubeless rims. If unsure, check rim manufacturer's instructions for what tubeless valves work on your rims.
2. First, remove the valve cap, lock ring, and O-ring from the valve body.
3. Then choose the correct rubber base for your rim type. Rims with a curved rim section will use the circular rubber base. Rims with a square rim section will use the square rubber base. Place this onto the bottom of the valve body. (If the rim has a larger valve hole and the smaller circular attachment is too loose, use the larger circular attachment to plug the hole).
4. Now push the valve body into the rim hole and push it in the correct direction. Then place the O-ring onto the valve body and slide it down until it meets the rim.
5. Screw the lock ring onto the valve body and tighten it over the O-ring. This will sandwich it between the lock ring and the rim. Push firmly down on the valve base inside the rim whilst tightening the lock ring. Continue pushing until the lock ring is hand tight and the rubber O-ring is squashed. This way you know you have created a good airtight seal.

TIP: do not overtighten as this can cause leaks. Finish by screwing on your preferred valve cap.

Use the valve core removal tool (integrated into the spare alloy cap) to remove the core and fill seamlessly with tubeless sealant.

INCLUDES

2x 7075 aluminum tubeless Presta valves
2x valve caps
2x lock nuts
1x Valve core removal tool (doubles as a spare valve cap)
3 x Pairs of rubber bases for size choice