RoadLink derailleur hanger extension

The RoadLink™ derailleur hanger extension is a unique patented device that offsets the position of the road derailleur to allow the use of a wide-range mountain bike cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter bike to a drivetrain that allows them to achieve the simplicity and reduced weight of a single front chainring, but without sacrificing the gear range of a double. It's also ideal for riders with double chainring bikes who want a lower gear for those ultra-steep climbs. It does not compromise shifting on the smaller cogs of the cassette, but allows the derailleur to work with a cassette up to 40T.

Easy to install in less than 5 minutes by any home mechanic.
The RoadLink mounts only to standard derailleur hangers.

NOTE: RoadLink repositions your derailleur to provide clearance for larger cassette cogs, but it does not increase derailleur capacity. It is critical to find and understand your derailleur's capacity before attempting to expand its gear range.

COMPATIBILITY

• 10s Cassette Compatibility:
  11-32: Not needed (mid-cage GS rear derailleur works)
  11-34: Simple (for double chainring make sure not to exceed derailleur capacity)
  11-36: Simple (for double chainring make sure not to exceed derailleur capacity)
  11-40: Simple (for double chainring make sure not to exceed derailleur capacity)
  11-42: Not compatible
  11s Cassette Compatibility:
  11-32: Not needed (mid-cage GS rear derailleur works)
  11-34: Simple (for double chainring make sure not to exceed derailleur capacity)
  11-36: Simple (for double chainring make sure not to exceed derailleur capacity)
  11-40: Simple (for double chainring make sure not to exceed derailleur capacity)
  11-42: Not compatible
  10-42: Not compatible
• Double chainrings are only compatible with GS (mid-cage) rear derailleurs. You may need to change the front chainring to avoid exceeding the rear derailleur's capacity.
  The RoadLink™ only mounts to standard derailleur hangers.
  The RoadLink™ is optimized for the geometry of Shimano 10 and 11-speed road derailleurs. It also works great with 9-speed road derailleurs. Traditional SRAM derailleurs work, but not X-HORIZON 1x-specific rear derailleurs. Campy derailleurs work best with cassettes up to 11-36.
  Triple chainrings are not compatible (mid-cage rear derailleurs cannot accommodate such a large range).
  Native direct mount frames are not compatible.
  Due to the lack of a clutch mechanism on Shimano road derailleurs, secondary chain retention (front derailleur or chain device) may be necessary, especially for rough or off-road use.
  Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment, and suspension setup, individual results may vary.
  This maximum dimension of 7.9mm is controlled by Shimano specifications, but some derailleur hangers do not meet specifications. You can slightly file the lower "spike" of these derailleur hangers to install the RoadLink™.
  

SPECIFICATIONS

• Weight: 17g
  Material: 6061 aluminum
  Includes: stainless steel bolt
  Torque: 8-10Nm
  Made in USA