Peaty's Holeshot Biofibre Tubeless Sealant

Developed with World Cup mechanics and world champion riders. Peaty's Holeshot Tubeless Sealant is packed with biodegradable fibers and sealing particles for a fast, strong seal.

FEATURES

• Water-based tire sealant for Tubeless tires
• Good sealing effect for holes and cracks up to 6 mm in diameter
• Biodegradable fibers and cellulose Bioglitter combined with latex
• Low viscosity for easy filling
• For temperatures between -20 °C and +50 °C
• For air pressure between 1 and 8.25 bar (15 and 120 psi)
• Suitable for use with CO₂ cartridges
• 120 ml is sufficient for 60 mm wide tires
• Lasts up to 6 months

RECOMMENDED QUANTITIES

• Road 30 - 45ml
• Cyclocross 60 - 75ml
• 26" MTB 60 - 80ml
• 27.5" MTB 70 - 90ml
• 29" MTB 100 - 120ml

INSTRUCTIONS FOR USE

1. Shake the bottle well.
2. Completely remove old sealant from the tire. If you have been using Peaty's Tubeless Sealant, you can skip this step. Degrease the inside of a new tire, rinse and dry thoroughly.
3. Place the tire on the rim and pump until it seats firmly on the rim.
4. Deflate completely, turn the valve to 3 o'clock, remove the valve core.
5. Pour the sealant into the tire through the valve.
6. Replace the valve core and inflate the tire to the desired pressure. Distribute the sealant by rotating the tire and bouncing it on the ground.
7. Seal leaks by rotating the tire until there are no more leaks, add a little more sealant if necessary.
8. Clean excess sealant with a little water.